Browse all practice questions for the DOT Tankers and Storage Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

DOT Tankers and Storage Practice Test course image
All questions

These questions are part of the practice quiz. Start practicing

  • Which tank designation is associated with a non-pressure liquid tank?
  • Which statement describes a nonpressurized tank car?
  • Which choice names the material class described as suitable for shipment in industrial packages with limited public and environmental hazard?
  • What type of tank does the MC 331 designation identify?
  • A tank described as a “bullet” stores gases liquefied by pressure. Which tank type is it?
  • Which listed equipment type is specifically identified for compressed gas transport?
  • Which tank type is specifically identified as vacuum loaded?
  • What safety feature allows gas to escape if a pressurized cylinder becomes overpressurized?
  • What kind of material is associated with industrial packages when the hazard to the public and environment is limited?
  • Which item fits the description of material shipped in industrial packages because it poses limited hazard to the public and environment?
  • A horizontal cylindrical tank of this type may be about 12 feet in diameter and 60 feet long. Which type is it?
  • A trailer transports gases such as oxygen and helium in steel tubes, each capable of holding about 5,000 psi. What kind of trailer is it?
  • Which designation identifies a high-pressure tank?
  • Which tank is heavily insulated, operates at low pressure, and is typically used for liquid nitrogen and other cryogenic gases?
  • Which listed cargo category refers to a load made up of more than one cargo type?
  • Which cargo is associated with industrial packaging intended for materials with limited public and environmental hazard?
  • Which railcar type is associated with transporting liquids?
  • Which specification best matches a gasoline tanker with an oval cross-section, blunt ends, multiple compartments, and a maximum pressure of 3 psi?
  • Which shipment would be most consistent with a limited-hazard industrial package?
  • Which size description is associated with a large cone-roof storage tank?
  • Which container may be made of glass or plastic and used to store corrosive materials?
  • Which specification is associated with an IMO Type 5 tank used for liquid gases held in a liquid state by pressure?
  • Which intermodal tank type is used for liquids or solids, is not normally pressurized, may have a gauge reading from 25.4 to 100 psi, and holds about 5,000 to 6,000 gallons?
  • Which tanker is designed for corrosive acids and bases and typically has a circular cross-section, reinforcing rings, and protective coating around the manhole?
  • Which feature is associated with a cryogenic liquid tank car?
  • Which description best fits a cone-roof storage tank?
  • Which railcar type is used to transport compressed liquefied gases?
  • A tanker carries about 9,000 gallons of gasoline in multiple compartments and can carry mixed loads. Which specification fits it?
  • Which containers commonly hold a wide variety of solid and unpressurized liquid hazardous materials, with sizes ranging from 1 to 95 gallons?
  • Which type of railcar typically carries dry bulk chemicals such as calcium carbide or ammonium nitrate?
  • How are liquefied gases maintained in an IMO Type 7 tank?
  • Which material best matches the description of items shipped in industrial packages when hazard to the public and environment is limited?
  • Which description best fits bottles used to transport liquids?
  • A shipment is characterized by limited hazard to the public and environment and uses an industrial package. What is being shipped?
  • Which storage tank has a floating roof but no fixed cover protecting the tank from the elements?
  • A shipment uses an industrial package and is described as presenting limited risk to the public and environment. Which type of material best fits this description?
  • Which tank type is associated with flammable or combustible contents stored at low pressure, from 0.5 to 15 PSIG?
  • Which railcar type is designed to carry dry bulk materials?
  • Which container is designed to transport gases in high-pressure cylinders tested at 3,000 to 5,000 psi, such as hydrogen or oxygen?
  • Which designation identifies a low-pressure chemical tank?
  • Which tank type is associated with volatile liquids such as gasoline stored at low pressure?
  • What type of container carries liquefied gases maintained by refrigeration, such as argon?
  • Which material is identified as being shipped in industrial packages due to its limited hazard to the public and environment?
  • A tanker is designated DOT 407 (MC 307). What type of tank is it?
  • Which intermodal tank type is classified as non-pressurized but can hold 14.5 to 25.4 psi and typically has a capacity of 5,000 to 6,300 gallons?
  • Which feature is characteristic of a cryogenic liquid tank in normal operation?
  • Which equipment type is identified as an intermodal tank?
  • What material is identified as having limited hazard to the public and environment when shipped in industrial packages?
  • Which corrosive-liquid tanker is described as a single-compartment vehicle with a capacity of about 7,000 gallons and operating pressure of 35 to 50 psi?
  • Which railcar is most suitable for mixed cargo packed in bags, boxes, drums, tanks, or cylinders?
  • Which feature helps distinguish a typical nonpressurized tank car from a pressurized tank car?
  • Which tank type is spherical and used to store gases liquefied by pressure at high pressure?
  • A steel tanker carries a variety of chemicals, may be insulated, holds about 6,000 gallons, and can operate at pressures up to 40 psi. Which type is it?
  • What internal pressure range is characteristic of an atmospheric or non-pressure storage tank?
  • Which listed tank is associated with cryogenic liquid service?
  • Which storage tank combines a floating internal roof with a geodesic dome roof?
  • What is the purpose of the cylindrical protective housing on a pressurized tank car?
  • Which intermodal tank type can transport hazardous or nonhazardous liquids and solids and has a typical capacity of 5,000 to 6,300 gallons?
  • Which of these is the best example of material shipped in an industrial package with limited public and environmental hazard?
  • What is the stated capacity of a common tote used for transporting hazardous or nonhazardous materials?
  • Which tanker carries refrigerated liquid gases in an insulated inner tank surrounded by an outer shell, with a vacuum space between them?
  • Which description best identifies a horizontal cylindrical tank in this classification?
  • A shipper is selecting an industrial package for a material noted for limited hazard to the public and environment. Which material is indicated?
  • Which tanker is typically used for liquefied gases, has a bullet-like shape, and holds about 11,500 gallons?
  • Which tank type is intended for cryogenic liquids?
  • What are large, reinforced polypropylene bags called, which may carry hazardous solids?
  • What is the stated capacity range for an IMO Type 5 tank?
  • A bullet-shaped tanker transports liquefied gases such as LPG and anhydrous ammonia, generally at pressures above 100 psi. What type is it?
  • What pressure range is associated with a low-pressure tank for flammable or combustible contents?
  • Which vehicle is pneumatically loaded and unloaded, carries dry bulk cargo such as calcium carbide, and operates at less than 22 psi?
  • What type of material is commonly carried in an unlined fiberboard drum?
  • A railcar carrying gases such as oxygen, helium, hydrogen, or nitrogen in high-pressure cylinders is a:
  • Which vehicle has a large rear compartment for filling and discharge and is used to transport refrigerated liquids such as liquid nitrogen?
  • Which trailer type is identified for dry bulk cargo?
  • What is the defining roof arrangement of a covered-top floating-roof tank?
  • Which tank type is described as typically storing gases liquefied by pressure and having a spherical shape?
  • Where must the nameplates be fixed on an IMO Type 5 tank?
  • Which cargo is specifically associated with industrial packages for materials that pose limited hazard to the public and environment?
  • Which tank designation is associated with corrosive liquids?
  • Which information is required on an IMO Type 5 tank nameplate?
  • Which trailer type is designed for dry bulk cargo rather than liquid cargo?
  • Which railcar is designed to carry pressurized flammable, poisonous, or nonflammable gases, with pressures that may reach 600 psi?
  • What kind of cardboard box may be used to carry hazardous liquids?
  • Which material is linked to industrial packaging for shipments presenting limited hazard to the public and environment?
  • Which tank type is non-pressurized, operates at atmospheric pressure, and commonly has dished ends?
  • Which railcar type is associated with mixed cargo?
  • A trailer carries mixed cargo in bags, boxes, and drums, requiring responders to check individual package labels to identify contents. What type of trailer is it?
  • A railcar classified as AAR 204XT is described as which type?
  • Which materials are shipped in industrial packages because they present limited hazard to the public and environment?
  • What tank type is represented by the MC 312 designation?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy